Shoei NXR Stab TC-2 Motorcycle Helmet - Blue
- In-Stock : We strive to ship all in stock orders within 1-2 business days.
- Pre-Order : If available with our suppliers , the item will arrives to our store usually with in 2-5 buessines days
- Note : If it's show pre-order we recommend Click "Ask a Question" to check stock levels or establish the leadtime.
- Response Time :Within 30 minutes
- Due to the size of our suppliers catalogues it is just not possible to stock every single part
- We will always do our very best to get your orders to you as fast as possible- because we get it! We know you want your shiny new bike parts as quickly as you get your hands on them, and we will always do our best to ensure this happens.
Guarantee Safe Checkout
![Shoei NXR Stab TC-2 Motorcycle Helmet - Blue](http://moto-ridenow.myshopify.com/cdn/shop/files/1119679.jpg?v=1719470550&width=650)
Shoei NXR Stab TC-2 Motorcycle Helmet - Blue
Shoei NXR Stab TC-2 Motorcycle Helmet
The new NXR is the latest pure sports helmet design from the Japanese master craftsmen at Shoei Premium Helmets. The New NXR Replaces the Shoei XR-1100.
Compact - Lightweight - Aerodynamic Design:
SHOEI's state-of-the-art wind tunnel at their Ibaraki Factory was the key to the NXR Helmet Design Process. Thanks to the time spent in the wind tunnel the NXR sport; a more compact and aerodynamic shell than the XR-1100 that was the lightest Snell Certified Helmet in the Shoei Line as of its introduction.
Ventilation Performance:
Using the Shoei Wind Tunnel the optimal balance of ventilation and noise was identified. Using this knowledge Shoei Engineers equipped the NXR with a large, three position lower vent shutter for ease of use with gloves, three upper vents for optimal air intake, and four upper exhaust vents too take full advantage of negative pressure suction. The end result is dramatically improved cool air intake and hot air expulsion.
CWR-1 Shield:
CWR-1 shield provides a vast field of vision that rivals helmet less peripheral. In addition to protecting against 99% of the sun’s damaging UV rays, the CWR-1 shield offers a distortion-free view throughout the entire range thanks to SHOEI’s 3D injection-moulding process. Additionally, innovative new ribs on the top and bottom edge of the shield improve rigidity and eliminate the bending that may occur from wind pressure and during the opening and closing process, and an improved shield locking mechanism rounds out SHOEI’s most advanced shield system to date.
Precision QR-E Base Plate System:
The NXR all-new QR-E base plate system facilitates quicker shield changes than ever before. Once a shield is installed, the strengthened spring-loaded base plates pull the shield back against the dual-lip, dual-layered window beading to ensure a wind and waterproof seal. Add to the mix an all-new five-stage rotating dial that allows fine-tuning the base plate's position easily and accurately.
Multi-Ply Matrix AIM+ Shell:
The NXR features the SHOEI Multi-Ply Matrix AIM+ Shell construction. Combining fibreglass with organic fibres, the NXR proprietary AIM+ Shell is not only strong, it is extremely lightweight, and comes in an industry-leading four shell sizes to ensure a custom fit for heads between the sizes of XS-XXL.
Dual-Layer / Multi-Density EPS Liner:
Dual-Layer, Multi-Density EPS liner not only provides an enhanced impact absorption by utilizing varying densities of foam in key areas around the riders head, it is also designed to allow cooling air to travel unrestricted through tunnels created in the EPS, further enhancing the NXR superior ventilation. In addition to enhanced impact absorption and ventilation, the precision placement of multi-density EPS liner material yields a more compact, lightweight design.
3D Max-Dry System II Interior:
Fully removable, washable, adjustable, and replaceable 3D Max-Dry System II interior. The 3D centre pad is three-dimensionally shaped to match the contours of a rider's head, allowing for an extremely comfortable fit while maintaining the firm hold necessary for distraction-free, high-speed riding. Additionally, the NXR 3D-shaped cheek pads are available in multiple sizes for a customizable fit, and SHOEI's Max-Dry System II liner material absorbs and dissipates sweat and moisture twice as fast as traditional Nylon helmet interiors.
Emergency Quick Release System (E.Q.R.S.):
SHOEI equipped the NXR Helmet with its exclusive Emergency Quick Release System (technology borrowed from The Shoei X-Twelve Helmet) that allows emergency medical personnel to easily remove the cheek pads from an injured rider's helmet. When the cheek pads have been removed, the helmet can be safely lifted from a rider's head without creating unnecessary strain in the neck area.
Note: All our helmets are purchased directly from Australian supplier and carry the ECE 22.05 or 22.06 standard
Refund Policy of MOTO RIDENOW PTY LTD
This Refund Policy ("Policy") applies to the following purchases:
https://www.motoridenow.com.au/
1 . General
(a) We offer refunds , repairs and replacements in accordance with the Australian Consumer Law and on the terms set out in this Refund Policy ("Policy").
(b) Any benefits set out in this Policy may apply in addition to consumer's rights under the Australian Consumer Law.
(c) Before making a purchase , please read this Policy so that you can understand your rights and what you can expect from us if you are not satisfied with your order.
2 . Australian Consumer Law
(a) Under the Australian Consumer Law:
(i) Our goods and services come with guarantees that cannot be excluded under the Australian Consumer Law. For major failures with the service, you are entitled
(A) to cancel your service contract with us; and
(B) to a refund for the unused portion, or to compensation for its reduced value.
(ii) You are also entitled to choose a refund or replacement for major failures with goods. If a failure with the goods or a service does not amount to a major failure, you are entitled to have the failure rectified in a reasonable time. If this is not done you are entitled to a refund for the goods and to cancel the contract for the service and obtain a refund of any unused portion. You are also entitled to be compensated for any other reasonably foreseeable loss or damage from a failure in the goods or service.
(b) We offer refunds , repairs , and replacements in accordance with the Australian Consumer Law.
(c) The Australian Consumer Law provides a set of Consumer Guarantees which protect consumers when they buy products and services.
(d) If the Australian Consumer Law applies , then we cannot avoid the Consumer Guarantees which it provides . If there is an inconsistency between this Policy and the Australian Consumer Law, the Australian Consumer Law will prevail.
(e) Further information about the Australian Consumer Law and these Consumer Guarantees is available from the website of the Australian Competition and Consumer Commission.
(f) If a product or service which you purchased from us has a major failure (as defined in the Australian Consumer Law) then you may be entitled to a replacement or refund . You may also be entitled to compensation for any reasonably foreseeable loss or damage resulting from that major failure.
(g) If a product or service which you purchased from us has a failure which does not amount to a major failure (as defined in the Australian Consumer Law) then you may still be entitled to have the goods repaired or replaced.
3 . Cancellation and Change of Mind
(a) In the event that you receive the products or services you have purchased , as stated , but that you simply change your mind , we may, at our discretion , offer you a refund or exchange , provided that:
(i) You notify us within 7 days of receipt.
(ii) In the case of services , the services have not already been performed.
(iii) The following conditions are satisfied:
a) Product has not been used in new condition.
b) Product has not been damaged and with original tags on.
c) Product must be returned with original receipt.
d) Unless required by the provisions of the Australian Consumer Law, electrical goods, helmets, gloves, boots are non-returnable or exchangeable.
e) Unless required by the provisions of the Australian Consumer Law, special orders (eg, exhaust, parts) and back orders are not cancellable.
f) The Purchaser is liable for freight and insurance. In the case of non-faulty returns, a 15% restocking, processing, and inspection fee may apply to the value of the product.
4 . Products Damaged During Delivery
(a) In the event that the product you ordered has been damaged during delivery:
(i) Please contact us as soon as possible.
(ii) Any damaged product must be returned in the condition in which it was received , together with any packaging and other items which you received with the damaged product.
(b) We will arrange to repair or collect the damaged product and replace it with an equivalent product , or to refund it , provided that you have contacted us within 7 days from the date of receiving the product.
5 . Exceptions
(a) Notwithstanding the other provisions of this Policy, we may refuse to provide a repair, replacement or refund for a product or service purchased by you if:
(i) You misused the said product in a way which caused the problem.
(ii) You knew or were made aware of the problem(s) with the product or service before you purchased it.
(iii) You asked for a service to be done in a certain manner, or you asked for alterations to a product , against our advice , or you were unclear about what you wanted.
(iv) Any other exceptions that apply under the Australian Consumer Law.
6 . Shipping Costs for Returns
(a) In the event that a product you have purchased fails to meet one or more Consumer Guarantees under the Australian Consumer Law, we shall bear any cost of shipping the said product (the "Returned Product") back to us , as well as any cost of shipping any replacement product to you.
(b) If the Returned Product can easily be shipped or returned , then you are responsible for organising for the Returned Product to be returned to us. If the Returned Product is eligible for a repair, replacement or refund under the terms of this Policy (including under the Australian Consumer Law) then we will reimburse you for the reasonable postage , shipping or transportation costs for the Returned Product.
(c) If the Returned Product is too large , too heavy, or otherwise too difficult to be removed and returned by you , and is believed to be eligible for a repair, replacement or refund under the terms of this Policy (including under the Australian Consumer Law) , then we will organise for the postage , shipping , transportation or collection of the Returned Product , at our cost.
(d) In the event that we organise and pay for the inspection , postage , shipping , transportation or collection of a Returned Product , and it turns out not to be eligible for a repair, replacement or refund under the terms of this Policy (including under the Australian Consumer Law) , then you will be required to pay the costs of any inspection , postage , shipping , transportation or collection of the Returned Product.
7 . Response Time
(a) We aim to process any requests for repairs , replacements or refunds within 5 days of receipt.
8 . How to Return Products
(a)You can contact us at the end of this Policy to discuss a return using the
information.
(b) Unless otherwise defined in our sole discretion , we shall pay all refunds in the same form as the original purchase or to the same account or credit card used to make the original purchase.
(c) To be eligible for a refund , repair or replacement , you must provide proof of purchase.
(d) You may be required to provide a government issued identification to qualify for a refund , repair or replacement.
9 . Contact Us
(a) If you wish to speak to us about this Policy or about any refund , repairs or replacements , please contact us at: motoridenow@outlook.com.